Register
Filter

Hot questions

0 votes
0 answers
801
GATE2018IN:36
Consider the standard negative feedback configuration with G(s) = $\frac{s^2+0.2s+100}{s^2 – 0.2s +100}$ and H(s) = $\frac{1}{2}$. The number of clockwise encirclements of (-1,0) in the Nyquist plot of the Loop transfer-function G(s)H(s) is $\_\_\_\_\_$
Consider the standard negative feedback configuration with G(s) = $\frac{s^2+0.2s+100}{s^2 – 0.2s +100}$ and H(s) = $\frac{1}{2}$. The number of clockwise encirclements...
0 votes
0 answers
802
GATE2018IN:19
The number of comparators required for implementing an 8-bit flash analog-to-digital converter is 8 128 255 256
The number of comparators required for implementing an 8-bit flash analog-to-digital converter is8128255256
0 votes
0 answers
803
GATE2018IN: 18
The representation of the decimal number (27.625)$_{10}$ in base -2 number system is 11011.110 11101.101 11011.101 10111.110
The representation of the decimal number (27.625)$_{10}$ in base -2 number system is11011.11011101.10111011.10110111.110
0 votes
0 answers
805
GATE2018IN:30
In the given circuit, superposition is applied.When V$_2$ is set to 0 V, the current I$_2$ is -6 A. When V$_1$ is set to 0 v, the current I$_1$ is + 6A. Current I$_3$ (in A) when both sources are applied will be (up to two decimal places)$\_\_\_\_\_$.
In the given circuit, superposition is applied.When V$_2$ is set to 0 V, the current I$_2$ is -6 A. When V$_1$ is set to 0 v, the current I$_1$ is + 6A. Current I$_3$ (in...
0 votes
0 answers
808
GATE2018IN: 26
Given $\overrightarrow{F}$ = (x$^2$ – 2y) $\overrightarrow{i}$ – 4xz$\overrightarrow{j}$ + 4xz$^2$\overrightarrow{k}$, the value of the linear integral $\int_c$\overrightarrow{F}$ . d$\overrightarrow{l}$ along the straight line c from (0,0,0) to (1,1,1) is 3/16 0 -5/12 -1
Given $\overrightarrow{F}$ = (x$^2$ – 2y) $\overrightarrow{i}$ – 4xz$\overrightarrow{j}$ + 4xz$^2$$\overrightarrow{k}$, the value of the linear integral $\int_c$$\ove...
0 votes
0 answers
809
GATE2018IN: 12
An input p(t) = sin(t) is applied to the system G(s) = $\frac{s-1}{s+1}$. The corresponding steady state output is y(t) = sin(t + $\varphi$), where the phase $\varphi$ (in degrees), when restricted to 0$^o$ $\leq$ $\varphi$ $\leq$ 360$^o$, is $\_\_\_\_\_\_$
An input p(t) = sin(t) is applied to the system G(s) = $\frac{s-1}{s+1}$. The corresponding steady state output is y(t) = sin(t + $\varphi$), where the phase $\varphi$ (i...
0 votes
0 answers
810
GATE2018IN: 24
An amplitude modulated signal is shown in the figure. The modulation index is(up to one decimal place) $\_\_\_\_\_$
An amplitude modulated signal is shown in the figure. The modulation index is(up to one decimal place) $\_\_\_\_\_$
0 votes
0 answers
811
GATE2018IN: 22
As shown in the figure, temperature $\theta$ is measured using a $K$ type thermocouple. It has a sensitivity of 40 $\mu V/^{\circ}C$. The gain $(G)$ of the ideal instrumentations amplifier is $25$. If the output $V_0$ is $96 \;mV,$ then the value of $\theta$(in $^{\circ}$C) is ______________.
As shown in the figure, temperature $\theta$ is measured using a $K$ type thermocouple. It has a sensitivity of 40 $\mu V/^{\circ}C$. The gain $(G)$ of the ideal instrume...
0 votes
0 answers
813
GATE2018IN: 52
Assuming ideal opamp, the $RMS$ voltage (in mV) in the output $V{_o}$ only due to the $230V,\; 50\; Hz$ interference is (up to one decimal place) __________.
Assuming ideal opamp, the $RMS$ voltage (in mV) in the output $V{_o}$ only due to the $230V,\; 50\; Hz$ interference is (up to one decimal place) __________.
0 votes
0 answers
814
GATE2018IN: 20
A voltage of 6 cos(100$\pi$t) V is fed as y-input to a CRO. The waveform seen on the screen of the CRO is shown in the figure. The Y and X axes settings for the CRO are respectively 1 V/div and 1 ms/div 1 V/div and 2 ms/div 2 V/div and 1 ms/div 2 V/div and 2 ms/div
A voltage of 6 cos(100$\pi$t) V is fed as y-input to a CRO. The waveform seen on the screen of the CRO is shown in the figure. The Y and X axes settings for the CRO are r...
0 votes
0 answers
815
GATE2018-GA-4
The area of an equilateral triangle is $\sqrt{3}$. What is the perimeter of the triangle$?$ $2$ $4$ $6$ $8$
The area of an equilateral triangle is $\sqrt{3}$. What is the perimeter of the triangle$?$$2$$4$$6$$8$
0 votes
0 answers
816
GATE2018IN: 10
Consider signal x(t) = . Let $\delta$(t) denote the unit impulse (Dirac-delta) function. The value of the integral $ \int^5_0$ 2x(t- 3)$\delta$(t-4)dt is 2 1 0 3
Consider signal x(t) = . Let $\delta$(t) denote the unit impulse (Dirac-delta) function. The value of the integral $ \int^5_0$ 2x(t- 3)$\delta$(t-4)dt is 2103
0 votes
0 answers
818
GATE2018IN: 39
Unit step response of a linear time invariant $(LTI)$ system is given by $y(t) = (1 – e^{-2t})u(t)$. Assuming zero initial condition, the transfer function of the system is $\frac{1}{s+1}$ $\frac{2}{(s+1)(s+2)}$ $\frac{1}{s+2}$ $\frac{2}{s+2}$
Unit step response of a linear time invariant $(LTI)$ system is given by $y(t) = (1 – e^{-2t})u(t)$. Assuming zero initial condition, the transfer function of the syste...
0 votes
0 answers
823
GATE2018IN: 46
The Boolean function $F(X, Y)$ realized by the given circuit is $\overline{X} Y + X \overline{Y}$ $\overline{X} \;\overline{Y}+ X Y$ $X + Y$ $\overline{X}\cdot \overline{Y}$
The Boolean function $F(X, Y)$ realized by the given circuit is $\overline{X} Y + X \overline{Y}$$\overline{X} \;\overline{Y}+ ...
0 votes
0 answers
824
GATE2018IN: 31
In the figure, an RLC load supplied by a 230 V, 50 Hz single phase source. The magnitude of the reactive power (in VAr) supplied by the source is $\_\_\_\_\_$.
In the figure, an RLC load supplied by a 230 V, 50 Hz single phase source. The magnitude of the reactive power (in VAr) supplied by the source is $\_\_\_\_\_$.
0 votes
0 answers
825
GATE2018IN: 6
A series R-C circuit is excited by a 1 <0 V sinusoidal ac voltage source. The locus diagram of the phasor current L = (x + jy)A, when C is varied, while keeping R fixed, is
A series R-C circuit is excited by a 1 <0 V sinusoidal ac voltage source. The locus diagram of the phasor current L = (x + jy)A, when C is varied, while keeping R fixed, ...
0 votes
0 answers
826
GATE2018IN: 51
A $1000\;\Omega$ strain gage $(R_g$) has a gage factor of $2.5$. It is connected in the bridge as shown in figure. The strain gage is subjected with a positive strain of $400\; \mu m/m.$ The output $V_0$ (in $mV$) of the bridge is(up to two decimal places) $\_\_\_\_\_\_\_$.
A $1000\;\Omega$ strain gage $(R_g$) has a gage factor of $2.5$. It is connected in the bridge as shown in figure. The strain gage is subjected with a positive strain of ...
0 votes
0 answers
827
GATE2018IN: 1
Let N be a 3 by 3 matrix with real numbers entries. The matrix N is such that N$^2$ = 0. The eigen values of N are 0, 0, 0 0,0,1 0,1,1 1,1,1
Let N be a 3 by 3 matrix with real numbers entries. The matrix N is such that N$^2$ = 0. The eigen values of N are 0, 0, 00,0,10,1,11,1,1
0 votes
0 answers
828
GATE2018IN: 38
Consider a standard negative feedback configuration with G(s) = $\frac{1}{(s+1)(s+2)}$ and H(s) = $\frac{s+a}{s}$, For the closed loop system to have poles on the imaginary axis, the value of $\alpha$ should be equal to (up to one decimal place)$\_\_\_\_\_\_$.
Consider a standard negative feedback configuration with G(s) = $\frac{1}{(s+1)(s+2)}$ and H(s) = $\frac{s+a}{s}$, For the closed loop system to have poles on the imagina...
0 votes
0 answers
829
GATE2018IN: 35
For the sequence $x[n] = \{1, -1,1, -1\},$ with $n = 0,1,2,3,$ the DFT is computed as $X(k) = \displaystyle{}\Sigma^3_{n=0}x[n]e^{-j\frac {2\pi}{4}nk}$, for $k = 0,1,2,3.$ The value of k for which $X(k)$ is not zero is 0 1 2 3
For the sequence $x[n] = \{1, -1,1, -1\},$ with $n = 0,1,2,3,$ the DFT is computed as $X(k) = \displaystyle{}\Sigma^3_{n=0}x[n]e^{-j\frac {2\pi}{4}nk}$, for $k = 0,1,2,3....
0 votes
0 answers
831
GATE2018IN: 4
Consider two functions f(x) = (x – 2)$^2$ and g(x) = 2x – 1, where x is real. The smallest value of x for which f(x) = g(x) is $\_\_\_\_\_\_$
Consider two functions f(x) = (x – 2)$^2$ and g(x) = 2x – 1, where x is real. The smallest value of x for which f(x) = g(x) is $\_\_\_\_\_\_$
0 votes
0 answers
832
GATE2018-GA-9
If $x^{2}+ x - 1 = 0$ what is the value of $x^4 + \dfrac{1}{x^4}$? $1$ $5$ $7$ $9$
If $x^{2}+ x - 1 = 0$ what is the value of $x^4 + \dfrac{1}{x^4}$?$1$$5$$7$$9$
0 votes
0 answers
833
GATE2018IN: 16
The diodes given in the circuit are ideal. At t = 60ms, V$_{pq}$(in Volts) is $\_\_\_\_\_\_\_$
The diodes given in the circuit are ideal. At t = 60ms, V$_{pq}$(in Volts) is $\_\_\_\_\_\_\_$
0 votes
0 answers
834
GATE2018IN: 13
The approximate phase response of $\frac{100^2e^-0.01s}{s^2+0.2s+100^2}$ is
The approximate phase response of $\frac{100^2e^-0.01s}{s^2+0.2s+100^2}$ is
0 votes
0 answers
835
GATE2018-GA-7
A set of $4$ parallel lines intersect with another set of $5$ parallel lines. How many parallelograms are formed? $20$ $48$ $60$ $72$
A set of $4$ parallel lines intersect with another set of $5$ parallel lines. How many parallelograms are formed?$20$$48$$60$$72$
0 votes
0 answers
836
GATE2018IN: 23
A piezoelectric pressure sensor has a bandpass characteristic with cut-off frequencies of 0.1 Hz and 1 MHz, and a sensitivity of 100 mV/kPa. The sensor is subjected to a static constant pressure of 100kpa. Its steady-state output will be 0 V 0.1 V 1 V 10 V
A piezoelectric pressure sensor has a bandpass characteristic with cut-off frequencies of 0.1 Hz and 1 MHz, and a sensitivity of 100 mV/kPa. The sensor is subjected to a ...
0 votes
0 answers
840
GATE2018IN: 9
Two periodic signals x(t) and y(t) have the same fundamental period of 3 seconds. Consider the signal z(t) = x(-t) + y(2t + 1). The fundamental period of z(t) in seconds is 1 1.5 2 3
Two periodic signals x(t) and y(t) have the same fundamental period of 3 seconds. Consider the signal z(t) = x(-t) + y(2t + 1). The fundamental period of z(t) in seconds ...
Page: