GO Instrumentation
Login
Register
Dark Mode
Brightness
Profile
Edit Profile
Messages
My favorites
My Updates
Logout
Filter
Profile
Wall
Recent activity
All questions
All answers
Exams Taken
All Blogs
Questions by soujanyareddy13
1
votes
1
answer
1
GATE2020 IN: 21
Assume that the opamp in the circuit shown is ideal. The value of $\frac{V_x}{I_x} (\text{in k}\Omega)$ is ____________.
Assume that the opamp in the circuit shown is ideal.The value of $\frac{V_x}{I_x} (\text{in k}\Omega)$ is ____________.
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
2
GATE2020 IN: 22
A sinusoid of $\text{10 kHz}$ is sampled at $\text{15 k samples/s}.$ The resulting signal is passed through an ideal low pass filter $(LPF)$ with cut-off frequency of $\text{25 kHz}$. The maximum frequency component at the output of the $\text{LPF (in kHz)}$ is _________.
A sinusoid of $\text{10 kHz}$ is sampled at $\text{15 k samples/s}.$ The resulting signal is passed through an ideal low pass filter $(LPF)$ with cut-off frequency of $\t...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
3
GATE2020 IN: 23
A $\text{200 mV}$ full-scale dual-slope analog to digital converter $\text{(DS-ADC)}$ has a reference voltage of $\text{100 mV}$. The first integration time is set as $\text{100 ms.}$ The $\text{DS-ADC}$ is operated in the continuous conversion mode. The conversion time of the $\text{DS-ADC}$ for an input voltage of $\text{123.4 mV (in ms, rounded off to one decimal place)}$ is _____.
A $\text{200 mV}$ full-scale dual-slope analog to digital converter $\text{(DS-ADC)}$ has a reference voltage of $\text{100 mV}$. The first integration time is set as $\t...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
4
GATE2020 IN: 24
The capacitance $C_x$ of a capacitive type sensor is $(1000x) pF,$ where x is the input to the sensor. As shown in the figure, the sensor is excited by a voltage $\text{10 sin(100}\pi\: t) V$. The other terminal of the sensor is tied to the input of a high input impedance amplifier through a shielded cable, with shield connected ... . The cable capacitance is $\text{100 pF}$. The peak of the voltage $V_A$ at the input of the amplifier when $\text{x=0.1 (in volts)}$ is _________.
The capacitance $C_x$ of a capacitive type sensor is $(1000x) pF,$ where x is the input to the sensor. As shown in the figure, the sensor is excited by a voltage $\text{...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
5
GATE2020 IN: 25
Two $100\: \Omega$ resistors having tolerance $3\%$ and $4\%$ are connected in series. The effective tolerance of the series combination $\text{(in % rounded off to one decimal place)}$ is ___________.
Two $100\: \Omega$ resistors having tolerance $3\%$ and $4\%$ are connected in series. The effective tolerance of the series combination $\text{(in % rounded off to one d...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
6
GATE2020 IN: 26
Consider the matrix $M=\begin {bmatrix} 1&-1&0\\1&-2&1\\0&-1&1\end{bmatrix}$. One of the eigenvectors of $M$ is $\begin {bmatrix} 1\\-1\\1\end{bmatrix}$ $\begin {bmatrix} 1\\1\\-1\end{bmatrix}$ $\begin {bmatrix} -1\\1\\-1\end{bmatrix}$ $\begin {bmatrix} 1\\1\\1\end{bmatrix}$
Consider the matrix $M=\begin {bmatrix} 1&-1&0\\1&-2&1\\0&-1&1\end{bmatrix}$. One of the eigenvectors of $M$ is$\begin {bmatrix} 1\\-1\\1\end{bmatrix}$$\begin {bmatrix} 1...
asked
Nov 3, 2020
Linear Algebra
gate2020-in
linear-algebra
matrices
eigen-values
eigen-vectors
+
–
0
votes
0
answers
7
GATE2020 IN: 27
Consider the differential equation $\frac{dx}{dt}=\sin(x),$ with the initial condition $x(0)=0. $ The solution to this ordinary differential equation is __________ $x(t)=0$ $x(t)=\sin(t)$ $x(t)=\cos(t)$ $x(t)=\sin(t)-\cos(t)$
Consider the differential equation $\frac{dx}{dt}=\sin(x),$ with the initial condition $x(0)=0. $The solution to this ordinary differential equation is __________$x(t)=0$...
asked
Nov 3, 2020
Differential equations
gate2020-in
differential-equations
ordinary-differential-equation
+
–
0
votes
0
answers
8
GATE2020 IN: 28
A straight line drawn on an x-y plane intercepts the x-axis at -0.5 and the y-axis at 1. The equation that describes this line is __________. $\text{y=-0.5x+1}$ $\text{y=x-0.5}$ $\text{y=0.5x-1}$ $\text{y=2x+1}$
A straight line drawn on an x-y plane intercepts the x-axis at -0.5 and the y-axis at 1.The equation that describes this line is __________.$\text{y=-0.5x+1}$$\text{y=x-0...
asked
Nov 3, 2020
Calculus
gate2020-in
calculus
cartesian-coordinates
+
–
0
votes
0
answers
9
GATE2020 IN: 29
The loop transfer function of a negative feedback system is $G(s)H(s)=\frac{1}{s(s-2)}$. The Nyquist plot for the above system _________. encircles $(-1+j0)$ point once in the clockwise direction encircles $(-1+j0)$ point once in the counterclockwise direction does not encircles $(-1+j0)$ point encircles $(-1+j0)$ point twice in the counterclockwise direction
The loop transfer function of a negative feedback system is $G(s)H(s)=\frac{1}{s(s-2)}$. The Nyquist plot for the above system _________.encircles $(-1+j0)$ point once in...
asked
Nov 3, 2020
Others
gate2020-in
+
–
0
votes
0
answers
10
GATE2020 IN: 30
$I_1,\; I_2\: and \:I_3$ in the figure below are mesh currents. The correct set of mesh equations for these currents, in matrix form, is ____________ $\begin{bmatrix} 3&-1&-2\\-1&3&-1\\-2&-1&3 \end{bmatrix} \begin{bmatrix}I_1\\I_2\\I_3\end{bmatrix}= \begin{bmatrix}V_1\\V_2\\-V_3\end{bmatrix}$ ...
$I_1,\; I_2\: and \:I_3$ in the figure below are mesh currents. The correct set of mesh equations for these currents, in matrix form, is ____________$\begin{bmatrix} 3&-1...
asked
Nov 3, 2020
Others
gate2020-in
+
–
0
votes
0
answers
11
GATE2020 IN: 31
Consider the function $f(x,y)=x^2+y^2.$ The minimum value the function attains on the line $x+y=1$ (rounded off to one decimal place) is __________.
Consider the function $f(x,y)=x^2+y^2.$ The minimum value the function attains on the line $x+y=1$ (rounded off to one decimal place) is __________.
asked
Nov 3, 2020
Calculus
gate2020-in
numerical-answers
calculus
maxima-minima
+
–
0
votes
0
answers
12
GATE2020 IN: 32
Consider two identical bags $B1$ and $B2$ each containing $10$ balls of identical shapes and sizes. Bag $B1$ contains $7$ Red and $3$ Green balls, while bag $B2$ contains $3$ Red and $7$ Green balls. A bag is picked at random and a ball is drawn from it, which was found to be Red. The probability that the Red ball came from bag $B1$ $\text{(rounded off to one decimal place)}$ is ______.
Consider two identical bags $B1$ and $B2$ each containing $10$ balls of identical shapes and sizes. Bag $B1$ contains $7$ Red and $3$ Green balls, while bag $B2$ contains...
asked
Nov 3, 2020
Probability and Statistics
gate2020-in
numerical-answers
probability-and-statistics
probability
conditional-probability
+
–
0
votes
0
answers
13
GATE2020 IN: 33
The rms value of the phasor current $\underline{I}$ in the circuit shown $\text{(in amperes)}$ is _____.
The rms value of the phasor current $\underline{I}$ in the circuit shown $\text{(in amperes)}$ is _____.
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
14
GATE2020 IN: 34
In the circuit shown, the rms value of the voltage across the $ 100 \Omega$ resistor $\text{(in volts)}$ is _________.
In the circuit shown, the rms value of the voltage across the $ 100 \Omega$ resistor $\text{(in volts)}$ is _________.
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
15
GATE2020 IN: 35
Let $g[n]=\left\{ \begin{array}{rcl} 1 & n=0 \\0 &n=\pm 1,\pm 2,\pm 3,\dots \end{array}\right. $ and $h[n]=\left\{ \begin{array}{rcl} 1 & n=0,3,6,9\dots \\0 & otherwise \end{array}\right. $ Consider $y[n]=h[n]\otimes g[n]$, where $\otimes$ denotes the convolution operator. The value of $y[2]$ is ___________
Let $g[n]=\left\{ \begin{array}{rcl} 1 & n=0 \\0 &n=\pm 1,\pm 2,\pm 3,\dots \end{array}\right. $ and $h[n]=\left\{ \begin{array}{rcl} 1 & n=0,3,6,9\dots \\0 & otherwise \...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
16
GATE2020 IN: 36
The loop transfer function of a negative feedback system is given by $G(s)H(s)=\frac{K}{s(s+2)(s+6)}$, where $K>0$. The value of $K$ at the breakaway point of the root locus for the above system $\text{(rounded off to one decimal place)}$ is __________.
The loop transfer function of a negative feedback system is given by $G(s)H(s)=\frac{K}{s(s+2)(s+6)}$, where $K>0$. The value of $K$ at the breakaway point of the root lo...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
17
GATE2020 IN: 37
The system shown in Fig.(a) has a time response y(t) to an input $r(t)=10u(t)$ as shown in Fig. (b), $u(t)$ being the unit step input. Both $K, t$ are positive. The gain $K$ of the system is __________
The system shown in Fig.(a) has a time response y(t) to an input $r(t)=10u(t)$ as shown in Fig. (b), $u(t)$ being the unit step input. Both $K, t$ are positive. The gain ...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
18
GATE2020 IN: 38
Assuming that the opamp used in the circuit shown is ideal, the reading of the $1\;Hz$ bandwidth, permanent magnet moving coil $(PMMC)$ type voltmeter $\text{(in volts)}$ is __________
Assuming that the opamp used in the circuit shown is ideal, the reading of the $1\;Hz$ bandwidth, permanent magnet moving coil $(PMMC)$ type voltmeter $\text{(in volts)}$...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
19
GATE2020 IN: 39
If the opamps in the circuit shown are ideal and $V_x=0.5\;mV$, the steady state value of $V_\circ \; \text{(in volts, rounded off to two decimal places)}$ is ___________
If the opamps in the circuit shown are ideal and $V_x=0.5\;mV$, the steady state value of $V_\circ \; \text{(in volts, rounded off to two decimal places)}$ is ___________...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
20
GATE2020 IN: 40
Two flip-flops are interconnected as shown in the figure. The present state of the flip flops are: $A=1, B=1$. The input x is given as $1,0,1$ in the next three clock cycles. The decimal equivalent of $(ABy)_2$ with A beign the $MSB$ and y being the $LSB$, after the 3rd clock cycle is ___________
Two flip-flops are interconnected as shown in the figure. The present state of the flip flops are: $A=1, B=1$. The input x is given as $1,0,1$ in the next three clock cyc...
asked
Nov 3, 2020
Digital Electronics
gate2020-in
numerical-answers
digital-electronics
sequential-circuit
flip-flops
+
–
0
votes
0
answers
21
GATE2020 IN: 41
The address lines $A_9 \dots A_2$ of a 10 bit, 1.023 V full-scale digital to analog converter $(DAC)$ is connected to the data lines $D_7$ to $D_0$ of an 8-bit microprocessor, with $A_1$ and $A_0$ of the $DAC$ grounded. Now, $D_7 \dots D_0 $ is changed from $\text{1010 1010 to 1010 1011}$. The corresponding change in te output of the $\text{DAC (in mV, rounded off to one decimal place)}$ is __________.
The address lines $A_9 \dots A_2$ of a 10 bit, 1.023 V full-scale digital to analog converter $(DAC)$ is connected to the data lines $D_7$ to $D_0$ of an 8-bit microproce...
asked
Nov 3, 2020
Digital Electronics
gate2020-in
numerical-answers
digital-electronics
microprocessor-8085
+
–
0
votes
0
answers
22
GATE2020 IN: 42
The real power drawn by a balanced load connected to a $\text{400 V, 50 Hz,}$ balanced, symmetrical 3-phase, 3-wire, $RYB$ sequence mains is measured using the two-wattmeter method. Wattmeter $W_1$ is connected in the $R$ line and wattmeter $W_2$ is connected in the $B$ line. The line current is measured as $\frac{1}{\sqrt3}A$. If the wattmeter $W_1$ reads zero, the reading on $W_2$ (in watts) is _______.
The real power drawn by a balanced load connected to a $\text{400 V, 50 Hz,}$ balanced, symmetrical 3-phase, 3-wire, $RYB$ sequence mains is measured using the two-wattme...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
23
GATE2020 IN: 43
A $6\frac{1}{2}$ digit timer-counter is set in the ‘time period’ mode of operation and the range is set as ‘ns’. For an input signal, the timer-counter displays $1000000$. With the same input signal, the timer-counter is changed to ‘frequency’ mode of operation and the range is set as ‘Hz’. the display will show the number _______.
A $6\frac{1}{2}$ digit timer-counter is set in the ‘time period’ mode of operation and the range is set as ‘ns’. For an input signal, the timer-counter displays $...
asked
Nov 3, 2020
Digital Electronics
gate2020-in
numerical-answers
digital-electronics
sequential-circuit
counters
+
–
0
votes
0
answers
24
GATE2020 IN: 44
The circuit shown uses ideal opamp powered from a supply $V_{CC}=5 V$. If the charge $q_p$ generated by the piezoelectric sensor is of the form $q_p=0.1 \sin(10000\pi t) \mu C$, the peak detector output after 10 cycles of $q_p$ $\text{(in volts, rounded off to one decimal place)}$ is ______.
The circuit shown uses ideal opamp powered from a supply $V_{CC}=5 V$. If the charge $q_p$ generated by the piezoelectric sensor is of the form $q_p=0.1 \sin(10000\pi t) ...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
25
GATE2020 IN: 45
A metallic strain gauge of resistance $R_X$ with a gauge factor of 2 is bonded to a structure made of a metal with modulus of elasticity of $200\: GN/m^2$. The value of $R_X$ is $1\:k\Omega$ when no stress is applied. $R_X$ is a part of a quarter bridge with three identical fixed resistors of $1\:k\Omega$ each. The ... of 4 V. The structure is subjected to a stress of $100\:MN/m^2$. Magnitude of the output of the bridge (in mV, rounded off to two decimal places) is _________.
A metallic strain gauge of resistance $R_X$ with a gauge factor of 2 is bonded to a structure made of a metal with modulus of elasticity of $200\: GN/m^2$. The value of $...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
26
GATE2020 IN: 46
A laser beam of 10 mm beam diameter is focused onto an optical fiber using a thin biconvex lens as shown in the figure. The refractive index of the lens is $1.5$. The refractive indices of the core and cladding of the fiber are $1.55 \;and \;1.54$ respectively. The minimum value of the focal length of the lens to attain he maximum coupling to the fiber $\text{(in mm, rounded off to one decimal place)}$ is ______
A laser beam of 10 mm beam diameter is focused onto an optical fiber using a thin biconvex lens as shown in the figure. The refractive index of the lens is $1.5$. The ref...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
27
GATE2020 IN: 47
As shown in the figure, a slab of finite thickness $t$ with refractive index $n_2=1.5$, has air $(n_1=1)$ above and below it. Light of free space wavelength $600 nm$ is incident normally from air as shown. For a destructive interference to be observed at R, the minimum value of thickness of the slab t (in nm) is __________.
As shown in the figure, a slab of finite thickness $t$ with refractive index $n_2=1.5$, has air $(n_1=1)$ above and below it. Light of free space wavelength $600 nm$ is i...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
28
GATE2020 IN: 48
Consider the finite sequence $X=(1,1,1).$ The Inverse Discrete Fourier Transform (IDFT) of X is given as $\text{(x(0), x(1), x(2)).}$ The value of $x(2)$ is _______
Consider the finite sequence $X=(1,1,1).$ The Inverse Discrete Fourier Transform (IDFT) of X is given as $\text{(x(0), x(1), x(2)).}$ The value of $x(2)$ is _______
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
29
GATE2020 IN: 49
A circuit consisting of capacitors, DC voltage source and an amplifier having a voltage gain G=-5 is shown in the figure. The effective capacitance across the nodes A and B $\text{(in $\mu$F, rounded off to one decimal place)}$ is ________
A circuit consisting of capacitors, DC voltage source and an amplifier having a voltage gain G=-5 is shown in the figure. The effective capacitance across the nodes A and...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
30
GATE2020 IN: 50
Consider the following state variable equations: $\dot{x_1}(t)=x_2(t)$ $\dot{x_2}(t)=-6x_1(t)-5x_2(t)$ The initial conditions are $x_1(0)=0 \:and\: x_2(0)=1.$ At $t=1$ second, the value of $x_2(1)$ $\text{(rounded off to two decimal places)}$ is ___________
Consider the following state variable equations:$\dot{x_1}(t)=x_2(t)$$\dot{x_2}(t)=-6x_1(t)-5x_2(t)$The initial conditions are $x_1(0)=0 \:and\: x_2(0)=1.$ At $t=1$ secon...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
31
GATE2020 IN: 51
Assume the diodes in the circuit shown are ideal. The current $I_X$ flowing through the $3\: k\Omega$ resistor $\text{(in mA, rounded off to one decimal place)}$ is ___________
Assume the diodes in the circuit shown are ideal. The current $I_X$ flowing through the $3\: k\Omega$ resistor $\text{(in mA, rounded off to one decimal place)}$ is _____...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
32
GATE2020 IN: 52
A $\text{1000/1 A, 5 VA, UPF}$ bar-primary measuring current transformer has $1000$ secondary turns. The current transformer exhibits a ratio error of $-0.1\%$ and a phase error of $3.438$ minutes when the primary current is $1000 A.$ At this operating condition, the rms value of the magnetization current of the current transformer $\text{(in amperes, rounded off to two decimal places)}$ is _________
A $\text{1000/1 A, 5 VA, UPF}$ bar-primary measuring current transformer has $1000$ secondary turns. The current transformer exhibits a ratio error of $-0.1\%$ and a phas...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
33
GATE2020 IN: 53
The mutual inductances between the primary coil and the secondary coils of linear variable differential transformer (LVDT) shown in the figure are $M_1$ and $M_2$. Assume that the self-inductances $L_{s1}$ and $L_{s2}$ remain constant and are independent of $x$. When x=0, $M_1=M_2=M_0.$ When $x$ ... x=D, the voltage across the detector becoms zero when $|V_2|=1.25|V_1|$. The value of $D$ (in mm, rounded off to one decimal place) is _______
The mutual inductances between the primary coil and the secondary coils of linear variable differential transformer (LVDT) shown in the figure are $M_1$ and $M_2$. Assume...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
34
GATE2020 IN: 54
In the Maxwell-Wien bridge shown, the detector D reads zero when $C_1=100 nF$ and $R_1=100 k\Omega$. The Q factor of the coil is ______
In the Maxwell-Wien bridge shown, the detector D reads zero when $C_1=100 nF$ and $R_1=100 k\Omega$. The Q factor of the coil is ______
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
35
GATE2020 IN: 55
The loop transfer function of a negative feedback system is $ G(s)H(s)=\frac{2(s+1)}{s^2}$. The phase margin of the system $\text{(in degrees, rounded off to one decimal place)}$ is __________
The loop transfer function of a negative feedback system is $ G(s)H(s)=\frac{2(s+1)}{s^2}$. The phase margin of the system $\text{(in degrees, rounded off to one decimal ...
asked
Nov 3, 2020
Others
gate2020-in
numerical-answers
+
–
0
votes
0
answers
36
GATE2020: 1
The unit vectors along the mutually perpendicular x,y and z axes are $\hat{i},\;\hat{j}\; and \;\hat{k}$ respectively. Consider the plane $z=0$ and two vectors $\overrightarrow{a} and\;\overrightarrow{b}$ on that plane such that $\overrightarrow{a}\neq \alpha \overrightarrow{b}$ for any scalar $\alpha$. A vector perpendicular to both $\overrightarrow{a} and\;\overrightarrow{b}$ is ___________ $\hat{k}$ $\hat{i}-\hat{j}$ $-\hat{j}$ $\hat{i}$
The unit vectors along the mutually perpendicular x,y and z axes are $\hat{i},\;\hat{j}\; and \;\hat{k}$ respectively. Consider the plane $z=0$ and two vectors $\overrigh...
asked
Nov 3, 2020
Calculus
gate2020-in
calculus
vector-calculus
vector-identities
+
–
0
votes
0
answers
37
GATE2020: 2
Consider the recursive equation $X_{n+1}=X_n – h(F(X_n)-X_n),$ with initial condition $X_0=1$ and h>0 being a very small valued scalar. This recursion numerically solves the ordinary differential equation ________ $\dot{X}=-F(X), X(0)=1$ $\dot{X}=-F(X)+X, X(0)=1$ $\dot{X}=F(X), X(0)=1$ $\dot{X}=F(X)+X, X(0)=1$
Consider the recursive equation $X_{n+1}=X_n – h(F(X_n)-X_n),$ with initial condition $X_0=1$ and h>0 being a very small valued scalar. This recursion numerically solve...
asked
Nov 3, 2020
Differential equations
gate2020-in
differential-equations
recursive-equation
+
–
0
votes
0
answers
38
GATE2020: 3
A set of linear equations is given in the form $Ax=b$, where A is a $2\times 4$ matrix with real number entries and $b\neq 0.$ will it be possible to solve for $x$ and obtain a unique solution by multiplying both left and right sides of the equation by $A^T$ (the super script $T$ denotes the transpose) and ... $A^T A$ is well conditioned Yes, can obtain a unique solution provided the matrix $A$ is well conditioned
A set of linear equations is given in the form $Ax=b$, where A is a $2\times 4$ matrix with real number entries and $b\neq 0.$ will it be possible to solve for $x$ and ob...
asked
Nov 3, 2020
Linear Algebra
gate2020-in
linear-algebra
matrices
matrix-algebra
+
–
0
votes
0
answers
39
GATE2020: 4
In the circuit shown below, the safe maximum value for the current $I$ is _______ $\text{1.0 A}$ $\text{0.5 A}$ $\text{0.1 A}$ $\text{0.05 A}$
In the circuit shown below, the safe maximum value for the current $I$ is _______$\text{1.0 A}$$\text{0.5 A}$$\text{0.1 A}$$\text{0.05 A}$
asked
Nov 3, 2020
Others
gate2020-in
+
–
0
votes
0
answers
40
GATE2020: 5
A differentiator has a transfer function whose phase increases linearly with frequency magnitude remains constant magnitude increases linearly with frequency magnitude decreases linearly with frequency
A differentiator has a transfer function whosephase increases linearly with frequencymagnitude remains constantmagnitude increases linearly with frequencymagnitude decrea...
asked
Nov 3, 2020
Others
gate2020-in
+
–
Page:
1
2
3
4
next »
GO Instrumentation
Email or Username
Show
Hide
Password
I forgot my password
Remember
Log in
Register